How to Remove Screen Print from a Shirt? DIY Solutions for Shirt Restoration!
A stencil of a pattern is made and used for transferring ink upon a surface, including fabric or document, in the printing process referred to as screen printing, which is additionally referred to as silk screening. If you want to give them a brand-new look, you could decide to take the screen-printed graphics off. How to remove screen print from a shirt?
There are various alternative techniques to get screen-print-free fabric if you want to get rid of the printing process from the material you are using.
Screen printing: What is It?
On a variety of well-liked goods, such as t-shirts and bags, screen printing is used to produce a stenciled image using a thick ink that does not seep through the cloth.
This method is employed by several for-profit businesses that sell t-shirts with graphics. With the appropriate equipment and inks, screen printing may also be done relatively quickly at home.
Since the procedure initially employed a tightly strained silk screen that had the negatives of the image stenciled over it, screen printing is occasionally referred to as silk screening.
The sticky ink is then rolled onto the mesh screen by the printer, which is subsequently placed onto the garment. The stencil stops the t-shirt from being inked by the absence of negative space, resulting in a design!
Due to the ease of the procedure, screen printing often only uses a few hues of ink. Heat ironing is certainly something you want to consider if you need a t-shirt that features a multicolored pattern.
The second really well-liked method of adorning t-shirts in large quantities these days is known as heat pressing. This entails applying heat to bond a transfer—typically made of vinyl—onto cloth.
More colors may be used in these patterns than in screen-printed ones. However, both techniques employ heat to etch designs that have a plasticky texture into the cloth.
You may frequently use the same methods for eliminating a screen-printed pattern and a heat-transfer layout, according to the kind of cloth in question.
How to Remove Screen Print from a Shirt?
Produced by Cotton T-shirts
Acetone, as well as nail polish remover, should be used. For erasing worn-out and broken screen print graphics on cotton t-shirts, use nail polish incorporating acetone as well as acetone itself.
On the artwork, apply Plastisol Remover. Plastisol is among the most widely used screen-printing liquids in use right now and is utilized by the majority of screen-printing companies.
The good news is that you can now simply remove the digital print pattern from any cotton T-shirt without causing any harm to the fabric by purchasing a specialist ink cleaner.
Spotting fluid should be used on the pattern. Using an area elimination gun and spot removal liquid is an entertaining approach to get rid of a screen print pattern from any cotton t-shirt.
Using the Iron as well as Peel Method. One of the simplest ways to remove the printed design off a piece of cotton clothing is to use the hot iron as well as the peel technique.
Fresh Ink Should Be Rinsed With Cold Water. Whenever working with new ink, you can usually get the ink off the shirt by washing it in frigid water.
Only newly transferred graphics will be removed using this technique; designs that remain displayed on the t-shirt for several days are not going to be removed.
To get rid of the layout, use an alcohol-based scrub. You may employ the sugar scrub approach to get rid of the ink off the screen print pattern if you are dealing with a more recent pattern, but it isn’t quite recent enough for the chilly rinse technique or if only a little section of an older design is still visible on the t-shirt.
Using T-shirts Made of Polyester
Polyester, an artificial fiber, requires special handling because of the way it reacts with the ink during screen printing.
The t-shirt has to be washed in warm water, the design should be treated with a gentle detergent, and then the design should be scrubbed off the garment using a firm brush.
T-shirts Made of Nylon
You may purchase a can of WD40 to eliminate a screen-printed pattern from a nylon t-shirt. Spray enough WD40 over the entire design, then let it set for approximately five minutes or so. After this period of time has passed, you must scrape the pattern with an old cloth while it still has WD40 on it.
You may remove the pattern with a cloth after it begins to dissolve. Once the WD40 has been removed, wash your t-shirt in a standard washer and dryer with ordinary detergent before wearing it.
What Is The Best Way To Use An Iron To Remove Screen-Printed Images From Fabric?
Spread the Material that was Printed Out Across a Flat Surface
The screen-printed cloth should be placed on a level surface where it’s possible to do the ironing with ease. If the cloth has rubber or vinyl imprints on it, you may easily remove them using an iron.
Embroider a Dry Towel Inside the Fabric that is Under the Print
Fold a paper towel in such a manner that it will fit snugly within the weave before using it. Position the clean towel so that the printed portion is beneath it.
Lay A Damp Cloth Over The Printed Pattern
Clean fabric or a towel should be soaked in icy water, and then the excess water should be wrung out. Then, just before you administer heat, cover the printed pattern with a moist towel.
The Wet cloth should be Ironed
It’s about time to begin the primary job at this point. Put the moist cloth on top of the hot iron. Ensure that the printing region is where you set the iron. To ensure that the heat correctly reaches the material being printed, you exert a little pressure. Additionally, it will be wiser to let the outdated iron rest on the fabric for a bit if you’re using one.
Take the Iron Out When the Damp Cloth has Dried
You will hear the sound of water fizzing when you set the steaming iron on a moist towel. The fabric will dry out after the water has evaporated, at which point you need to ditch the iron right away.
A Knife Can be Used to Loosen the Process of Printing
You’ll see the printing has softened after taking the cloth and ironing off. Grab a sharp knife, then begin carefully and gently scraping the printing. Additionally, you must keep doing this until the substance is free of any screen printing.
How Can Screen Printing Be Removed From Fabric Using Solvents?
Purchase a solvent, such as rubbing substances, nail polish remover, or glue stripper. Additionally, you may opt for specialized thermal transfer vinyl cleaner meant to remove vinyl writing off garments.
To determine if the solvent harms your clothing, apply it in a concealed place. It is okay to continue if the garment appears fine after you drop the chemical on.
The printing should be facing you on the inside of the garment. Put the inside-out article of clothing standing in front of your body on an even surface.
On the area of the garment where the printing is, pour the solution of solvent. Throw out sufficient solvent to completely wet the fabric’s backside, which is where the desired print is located.
Turn the garment around so the artwork is on the outside. Using your fingertips or a knife’s pointed edge, try to remove the imprint off the surface.
Continue till all the original printing has been removed. By scraping as well as scraping, remove as much of the print as you can.
When you run out of financial sound, turn the garment inside out once more, add more solvent, and then attempt to peel as well as scrape the last of the print away until it is completely removed.
To get the solvent off the clothes, wash them as usual.
Watch this video,
Video Credits – Md. Mridul Kabiraz
You May Also Like
- Screen Printing vs Vinyl – (Comparing Screen Printing & Vinyl Printing)
- The Best Resolution for Screen Printing – Striking the Right Balance!
- How to Cure Screen Printed Shirts at Home? Bringing Your Designs to Life!
